Find a hydraulic system reserch paper

Find a hydraulic system that interests you and research how the system works. This can be a high-pressure hydraulic system, or a low-pressure fluid transport/delivery system. It can be a system from a stationary machine (a hydraulic press, bender, etc…) or from a piece of mobile equipment (a forklift, an excavator, bulldozer, etc…). If you choose a high-pressure system, you can ignore system losses (Chapter 4 stuff). All systems have a prime mover, pump(s), and other fluid flow control valves/components.
You will be required to submit a written report of at least 3-4 pages (not including pictures and graphs) in length which shall include the following information:
A brief abstract giving an overview of your system, its typical uses and why you chose this system. (10%)
A detailed description of the operation of your system. How does it work and what pressures are required? What is the reservoir size vs pump flow? What type of fluid is used? What is the horsepower of the system? If actuators are used, what forces or torques are generated? Etc… (20%)
Include a picture and/or schematic (using fluid power symbols in Appendix G (pages 634-636) in your text book and reference circuits in Chap. 9 of your textbook to see how circuits are typically drawn in case you need to generate a circuit for your system. The schematic may be hand drawn (Neatly!) or computer generated. (20%)
List and describe any pumps, compressors, valves, fittings and other relevant components in the system. Be specific, what type of pump (gear, vane, piston, etc.), what type of valve (PCV, FCV, DCV, check valve, etc.). Why are these components present in the system (their function/purpose)? If you do not have specifics on the application, estimate component dimensions and performance requirements (cycle time, speed, etc.). Using this information, do horsepower, pressure, and flow analysis. List any relevant equations needed to fully describe the component and their operation. Be as scientific as possible when describing the various components in your system. If you are doing a low-pressure system (less than 500 psi), be sure to include pump type, flow rates, line losses, estimated pressure drops across key components, and do a complete Energy Equation calculation (as accurate as you can based on known system information (guess on any unknowns, such as pipe diameters, flow rates, etc. and use these estimates in your calculations). (50%)
Provide a front title/cover page with your report which shall include the name of your system, your name, my name, the course name and number and any other relevant information you feel compelled to include. It should be typed and printed in a clear to see manner.

Last Completed Projects

topic title academic level Writer delivered