Engineering Report with Calculation (Dead and Live loads, Loads and Straining actions

Part C Report Specifications

Structure your report to address the following questions: (Recommended word counts are in brackets) In your report, you must state any assumptions you have made

Part C1: Calculate the design loads for specific members and select cross sections: Beams
Calculate loads and straining actions:
• Dead load on beam B1
• Live load on beam B1
• Dead load on beam B2
• Live load on beam B2

• For the following steps, only Beam B2 (Computer generated drawings)
o Calculations of Uniformly Distributed Load (UDL) for load combinations for B2
o For the critical load combination(s), calculate maximum bending moment, maximum shear force and Draw the Shear Force Diagram(s) (SFD) and Bending Moment Diagram(s) (BMD)
o Select a suitable section from the Design Capacity Tables
o Check Serviceability (deflection) requirements for the selected cross section

Part C1: Calculate loads and straining actions: Columns (200 words) For the following steps, only column C1
• Dead load and Live loads on column
• Calculations of axial forces for the applicable load combinations for column
• Calculate in plane and out of plane buckling for column
• Select a suitable section from the Design Capacity Tables

PDF DETAILS HAVE BEEN PROVIDED AND AUSTRALIA STANDARDS MUST BE USED AND ALL CACULATION USING THE METRIC SYSTEM

Last Completed Projects